First, the product description:
Yellow gum is a medium viscosity chloroprene rubber product. It has better electrical properties and heat resistance than other products in terms of characteristics, high-performance leveling, and UL94V0 through fire rating. It maintains good adhesion characteristics under standard temperature and heating contact. It is usually assembled with electronic components, SMD, washing machines and horns. It can also be applied to metal, rubber, plastic, wood and stone.
Second, the characteristics:
1. It has a flame retardant neoprene adhesive after the film is dried
2, with excellent initial adhesion strength, heat resistance, water resistance, aging resistance is particularly good
3, with shaking, it is not easy to produce vertical flow
4, the drawing is small, easy to work
5, can be widely used in different materials then
Third, use:
1. Insulation, dustproof, shockproof fixing, filling and subsequent parts of electronic components, electrical appliances, audio, optics, etc.
2, suitable for hot film cushioning materials and electronic computer air filtration and other manufacturing
3, aluminum, iron and other metals, ABS, acrylic and other hard plastics then
4, the printed circuit board and the internal parts of the laser player fixed
5. Fixing of large-scale electronic products for welding engineering
Fourth, the description
1. Moisture, dust, oil, etc. on the surface of the material to be subsequently removed must be removed first.
2. Coating method: a tool such as a brush is evenly coated with an adhesive on both sides of the material to be coated, and the coating amount is 150 to 250 g/m2
3. After the coating, the material to be applied is conditioned for 2 to 5 minutes at room temperature, and then laminated.
4, forced drying: 50 ~ 60 ° C for about 4 to 6 minutes, 80 ° C for about 2 to 3 minutes
Note:
This adhesive is a solvent-based adhesive, and it is flammable before it is dried. Therefore, it is absolutely prohibited to use fire gas around the operation.