Main use:
Used in metal, copper, ceramic, bakelite, fiberglass, ABS, PVC, electrical and electronic parts insulation, anti-vibration and fixed, suitable for power, speakers, toys, speakers, furniture, electrical appliances, handbags and other industries.
Technical characteristics:
|
|
Performance
|
MAX-1603HFR
|
UL-1608
|
YL883
|
|
3
|
main ingredient
|
Chloroprene rubber
|
Neoprene/polyurethane
|
Neoprene
|
|
4
|
Exterior
|
Light yellow liquid
|
Light yellow liquid
|
Light yellow liquid
|
|
5
|
Viscosity (25"C/CPS)
|
17000~21000
|
35000~80000+1000
|
15000~25000
|
|
6
|
Curing point (%)
|
44+2%
|
60+2%
|
42+2%
|
|
7
|
Specific gravity
|
1.30±0.05
|
1.30±0.05
|
1.0±0.05
|
|
8
|
PH value
|
7±1
|
8±1
|
7±1
|
|
9
|
Dry time (minutes)
|
3~5
|
2~5
|
5~10
|
|
10
|
Saveable time (25"C)
|
6 months
|
6 months
|
6 months
|
|
11
|
Flame resistance point
|
260 ° C
|
260 ° C
|
200 ° C
|
|
12
|
temperature resistance
|
-26~140℃
|
-30~140℃
|
-30~140℃
|
|
13
|
Packing
|
18KG/3KG
|
18KG/3KG
|
18KG/3KG
|
Instructions for use:
1. Moisture, dust, oil, etc. on the surface of the material to be subsequently removed must be removed first.
2. Coating method: A tool such as a brush is uniformly coated with an adhesive on both sides of the material to be coated, and the coating amount is 150-250 g/m.
3. After the coating, the material to be applied is applied at room temperature for 2-5 minutes, and then laminated.
4. Forced drying: 4-6 minutes at 50-60 °C and 2-3 minutes at 80 °C.
5. This adhesive is a solvent-based adhesive. It is flammable before it is dried. Therefore, it is absolutely forbidden to use fire gas around the operation.
