Hello! Welcome to the official website of Dongguan Yilin Electronic Materials Co., Ltd.
4dhcpmingchen
Your Location  Home -> Products  ->  Epoxy resin  ->  Two-component AB glue-YS-1003B
Two-component AB glue-YS-1003B
Main use:
This series is a non-solvent type single-copy ring resin product, which is synthesized from no material, has low linear expansion coefficient and high/shenzhen, vibration, and hard clothing. It is widely used in the fixed connection of electronic components, handicrafts and gifts. It has excellent bonding strength for packaging and bonding between metal, porcelain, glass, fiber products and hard plastic: it is recommended for the inductance line diagram. The pressed iron core or the core of the core is fixed. Especially after immersion in tin and solder, it does not affect the strength of the operation.
Technical characteristics:
Serial number
Performance
WL7603
dark grey
dark grey
3
Exterior
Black, gray, white
1500~4500 <100
1.4~1.5
4
Specific gravity (25"C)
1.2~1.5
1.3~1.5
1000~3000
5
Viscosity (25"C/CPS)
38000~40000
38000~40000
25000~45000
6
Curing time (100‘c/120"c)
1.5h/1h
1.5h/1h
2.5h/1.5h
7
Hardness (23"c)
80~85
80~85
35~55
8
Bending strength
10~15
10~15
16~20
9
tensile strength
6.2
6.2
6~10
10
Soldering resistance temperature (3min)
400"C~480"C
400"C~480"C
400"C~480"C
11
Volume resistance (ohms)
4.7 x10 to the 16th power
4.7 x10 to the 16th power
5.2x10 to the 13th power
12
surface resistance
5.8x10 to the 16th power
5.8x10 to the 16th power
2.5x10 to the 13th power
13
Insulation breakdown voltage (KV/MM)
22
22
18~20
14
Water absorption rate
0.3%
0.3%
0.3%
15
Shelf life
25"C/22 months 5" C/3 months
25"C/22 months 5" C/3 months
25"C/22 months 5" C/3 months
Instructions for use:
1. The workplace should be clean. Air circulation must be installed when necessary.
2. Since the product is a chemical product that reacts when heated, the temperature of the environment has a great influence on the quality of the product. Please keep the product in a low temperature environment to ensure the stability and quality of the product. During use, the product is prone to gelation or a decrease in bond strength.
3. If the gel is not used up after removal, please seal it tightly and put it in a frozen environment.


Dongguan Yilin Electronic Materials Co., Ltd. Technical support:【Dongguan website construction】 Address: No.13, Jiyuan Street, Second Industrial Zone, Juzhou Village, Shijie Town, Dongguan City, Guangdong Province, China phone:+86-133-1843-6822 Contact person: Mr. Lian 【Back-stage management
Hot Search: Dongguan Adhesive Manufacturer | Adhesive Manufacturer | Dongguan Epoxy Resin Pouring Adhesive